|
Remote Alarms
MeterStar™ provides a complete turnkey portal to your natural gas measurement solution. The secure server provides morning reports organized by run so that your field personnel can easily identify production problems and organize their daily work efficiently. Detailed information about each measurement point is available, complete with graphs to quickly show flow trends. You have the flexibility of setting alarm points for any of the flowing conditions and being notified via e-mail, pager, or via the telephone if an alarm occurs. For users who already have an existing reporting system, MeterStar provides an electronic message from our servers to yours so the information can be integrated with your system. ::New for 2005:: • ABB TotalFlow (both Modbus and TotalFlow ASCII)
The five I/O ports on the MeterStar board can be configured for individually
selected Analog or Digital Input, or digital output. When configured as analog
input a 10 bit A/D is utilized over a configurable 0 to 5 VDC, 1 to 5 VDC, or 4
to 20mA range. Each input can be configured for alarms supporting a Low Low,
Low, High, or High High setpoint. In addition to reporting upon alarm, a
current status is sent each day.
|
|||||||||||||||||||||||||||||